Youtor
>> YOUR LINK HERE: ___ http://youtube.com/watch?v=94bv1KPySSY
QuietFILL Fill Valve and Flapper Kit Install by Korky | https://www.korky.com/parts/kits/quie... • Hello and Welcome to Korky Toilet Repair. • Today we are going to install your new QuietFILL Fill Valve Premium Flapper Kit. • The first step is to shut off your water supply to your toilet. • Then hold the lever down to drain the water from your tank. • Sponge out the remaining water in your toilet tank. • Place a bucket underneath your toilet tank to catch any excess water. • Disconnect your water supply line and remove the mounting nut. • Remove the old fill valve. • Now, remove the old flapper. • Install your new Korky Flapper. • Attach the flapper ears to the tabs of the flush valve. • Attach the flapper chain to the flush lever with minimal slack. • Now, turn the top of your new fill valve counter clockwise and pull up to fully extend. • Place the valve in the tank and press down on the fill valve until the corner of the white cover lines up with the top of the flush valve. • Lock the fill valve in place by twisting the upper half clockwise. • Make sure the rib on the upper half of the valve lines up with the pegs on the bottom half. • Attach the refill tube to your new fill valve. • Make sure the refill tube has a direct path to the flush valve. • When your fill valve is set, screw on the mounting nut until hand tight. • Push the refill tube towards the front of the tank to ensure the port is locked in place. • Insert the metal clip into the refill tube and attach the clip to the flush valve. • Reattach the water supply line. • Turn on the water supply line to complete your installation. • Congratulations, you have successfully installed your new Korky QuietFILL Fill Valve Premium Flapper Kit. • Thank you for choosing Korky. • If you have any questions or need further assistance with your installation, please visit our website or call us at 1 800 528 3553.
#############################
