Outfeed Assembly Table How to build

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=9RkvPtXveas

This is the full build of my outfeed/assembly table for my workshop. It's 6' x 4', has 4 cupboards, each with 2 sliding trays for tool/materials storage, 5 drawers two clean sides to place key items such as measuring tools, small clamps tape. • I have full build plans, including cutlist directions available on my website: https://deerrivercraftsman.com/store/... • Please check out the rest of my website while you're there! • The cabinets, drawers trays were all made with 19mm (3/4 ) baltic birch plywood, and the door panels drawer bottoms were made with 6mm (1/4 ) plywood - all supplied by my local builders merchant. • The drawer fronts, door rails stiles were constructed with carpentry grade oak board I had in stock • This build was the third significant piece of workshop furnitiure for my workshop, which I finished building in December 2018 - all my other builds are on my channel • • For information about my tools head over to my website (link below) or if you're interested in my Table Saw, click the link below! • • https://www.tagserve.com/clickServlet...{TAG.AID} • Thanks for watching, and please think about subscribing to the channel - you'll see plenty more workshop projects furniture builds in the future - next up a Router Table with DIY Lift System! • Any questions, please leave in the comments or contact me via my website https://deerrivercraftsman.com/ • Instragram / deer_river_craftsman

#############################

New on site