Ohlins DH38 MTB Fork Spring Conversion Review

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=9e9g72thlvY

A full review of the coil spring conversion on the Ohlins DH38 fork. After many years of riding on the air spring, I recently converted to the new spring system. Install video how to: • Ohlins DH38 MTB Fork Air Spring to Co... • Tested small bump compliance, drops, high speed, cornering, and large fast jumps. The results are shocking. • **EDIT: Ohlins does indeed sell the DH38 with the spring rather than the air shock. Part number FDMTB 3820 2120 - DH Air TTX 200mm, COIL (no crown incl.) • DH 38 Settings: • HSC: 5 clicks from from counter clockwise • 4 Position Compression in the lowest setting • Rebound 5 clicks from full clockwise • Spring is the Blue rated for 180 pound rider • Rider full weight when kitted, 187 lbs. (helmet, water, chest protector, pads, etc.) • Preload set to 4 clicks from top • Sag set to 14% • Head tube angle is set to 63 degrees • Tire Size: 27.5 /27 5 • Tires are Michelin DH22 front and back • Tire Pressure is 24psi front 25psi rear • Rear Shock is Ohlins TTX with 457 Lb spring • 00:00 Intro • 00:43 First Impressions • 1:35 Small Bump Compliance • 3:45 First lap Thoughts • 4:29 Hitting the drops • 6:02 Washboards and Corner compliance • 7:00 Jumps! • 9:06 Mega CASE ALERT! • 10:18 High speed bump test • 10:37 Final Thoughts • 14:13 Dave and Erik on No Quarter

#############################

New on site