Youtor
Tile joints and Corners
>> YOUR LINK HERE: ___ http://youtube.com/watch?v=9mn7g59AEPQ
after tile to fill stitches • How use to tile joint filler, • corners and surfaces finishing • tile joints confuse the mass of small amounts and are working with the rubber tool oblique movements. After 10 -15 minutes begin scouring the suture • external corners of the use of stainless steel corners, internal use silicone, • We use rubber gloves or plastic materials and artic spoon after each Swipe times cleaned with a paper towel. Gluing corners with painters tape, then it penetrates inside sanitary silicone silokons to attach himself to the edges and do not need to fill completely the whole depth • thermal deformation of the wall slightly expands and shrinks and silicone corner is flexible and serves well. Immediately after the silicone filling and removing water with soap or shampoo wet finger or a plastic spoon, remove paint strip tiles in the corners and do not touch because the movement does not come off as a result later. • sanitary silicone corners use a wall - wall and wall - floor. This requires flexibility and purity so that humidity in the room should not mold • silicone can get stitches tone or floor tiles tone. • holes in floors and walls, heating pipes through the tiles with this isolating silicone • • Underfloor heating - lightweight cons... • • Tile A Wall - start, holes, corner • • Tile joints and Corners
#############################
