Cleaning Inverter AIRCON unit indoor DIY aircon cleaning











>> YOUR LINK HERE: ___ http://youtube.com/watch?v=9rUn6RuvML0

Why Aircon Become Much Colder After Chemical Cleaning?  • One of the most common culprits why your aircon might not work properly is the dirt that it had accumulated over time. The dirt invades the system of your aircon and eventually caused the system to malfun. • To carry out aircon chemical clean, a number of careful steps must be done to ensure that everything flows well. Air filters are cleaned using chemical-based cleaners, fan bearings are then lubricated to reduce the noise. • Chemical cleaning can also help if your aircon has water leakage problems. This can be done by simply cleaning the drainage system of the unit. • The fan evaporator coil is yet another important part of your unit that needs chemical cleaning. This is the part that allows heat transfer and its function can be optimized by removing all the accumulated dirt and dust. The refrigerant gas is equally important like the fan evaporator coil. But aside from that, the refrigerant gas is also the part that usually acquires the most dirt as it gets the outside air. Other parts than need aircon chemical clean are the blower wheel, drain pan and pipes. • In general, the accumulation of the dirt inside your aircon's system greatly affects the performance of the unit. Therefore, having a timely aircon chemical clean can definitely benefit you. Since all the parts are completely cleaned, your aircon can now perform as good like it's new. Chemical cleaning clears out all the dirt inside your aircon which may hinder the conduction of the heat. Ironically, your unit's heating system must run properly in order to optimize its cooling effects. • #Airconcleaning #Indoorairconunit #DIY #InverterAircon #Cleaning #DIY #STAYHOME #WITHME

#############################









Content Report
Youtor.org / YTube video Downloader © 2025

created by www.youtor.org