SIMPLE Circular Saw CrossCutting Jig

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=A25ihNqY_n8

I built a simple crosscutting jig for use with a circular saw. It's easy to build, and consists of just one 2' by 2' by 1/2 piece of plywood and a small part of a 2x4 you can get from the local home center. This IS my first Youtube video, so i would appreciate it if you watched the whole video and say what you think! Thanks! • Check out my second video where I build a workbench using this jig! • Easy-to-Build Simple WorkBench • Cut List (Modified to right dimensions): • (4x) 2 tall 2x4s Whatever the maximum cut depth of your circular saw is, just subtract 1/2 from that to get the height of the 2x4 • (1x) 3 1/2 plywood with (1x) 1 plywood rail It might be longer than needed when rail is assembled, so you have to cut off excess • (1x)1 1/2 plywood with (1x) 1/2 plywood rail • The music is from YouTube's free audio library: Foundation by Vibe Tracks

#############################

New on site