How to Install Arduino 233 and use ATtiny85 DigiSpark 2024 Guide

YOUR LINK HERE:

http://youtube.com/watch?v=AoqAH6Wx09s

As there are quite a few issues getting the ATTINY85 Digispark working in Arduino, I have made a guide to get it working with the latest Arduino 2.3.3 (November 2024). • Get your Bad USB / Homemade Rubber Ducky working! • Steps: • 1. Download and install Arduino IDE 2.3.3 • https://www.arduino.cc/en/software • 2. Save the page which has the required ATtiny85 board packages offline. • https://drazzy.com/package_drazzy.com... • You will get a certificate error in browser due to the certificate having expired. We need to edit this file offline as Arduino will not connect to the site unless the certificate is valid. • 3. Open the file in a text editor of your choice. Look for the URL that contains 'micronucleus-cli-2.5-azd1b-x86_64-mingw32.zip'. Change 'https' to 'http' and save. • 4. Open Arduino and go to settings, preferences. Add the local file path to the package.json file we just edited. - This will be different for you... (file:///C:\\Users\\YOURNAME\\Downloads\\Arduino-Demo/package_drazzy.com_index.json) • 5. Download and install the ATtiny85 drivers so it can interact with Windows. • https://forum.arduino.cc/uploads/shor... • 6. Now you can use the board. Do not plug in the ATtiny85 until you have selected upload, and it tells you to connect it!

#############################

New on site