Youtor
How to Remove and Disassemble an Onity HT24 Lock
>> YOUR LINK HERE: ___ http://youtube.com/watch?v=AxPrDkDsY1A
How to Remove and Disassemble the Onity HT24 Lock • How to uninstall Onity HT24 lockset from the door block • 1. Remove Torx #10 screws from thumb turn and back handle • 2. Retract deadbolt • 3. Remove thumb turn and back handle • 4. Remove cover plate • 5. Unplug privacy connector • 6. Remove four #2 phillip head screws • 7. Straighten privacy wire • 8. Remove Onity HT24 front lock from door block • How to disassemble Onity HT24 covers and handle • 1. Remove front handle • 2. Remove privacy wire • 3. Remove 6 torx #10 screws • 4. Remove back plate • 5. Remove battery insulator • 6. Remove 4 torx #10 screws • 7. Remove card reader cover • 8. Remove torx #10 screw • 9. Remove battery cover • There are four major parts: • Motherboard • Clutch Kit • Battery Board • Card Reader • Please view videos on how to uninstall and install the specific components • For more information or to purchase replacement parts, check out https://www.electroniclocksmith.com
#############################
