How To Install A Winch Kings Domin8rX Into an Ironman Bullbar

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=B38SexjAC70

In this video, I'll show you how to install a winch into a bullbar. This is a Kings Domin8rX 12,000lb winch that I fitted into the Ironman bullbar that's on my Nissan Navara. • The install required the removal of the bullbar, so if you are considering a winch when selecting a bullbar, it would make the process a bit easier by installing both at the same time. • Besides having to cut the bumper bar below the grill, to fit the winch, the rest of the install was fairly straight forward. • Having a crane to support the bullbar, made this a one person operation. If you don't have a crane, I'd suggest getting some help with the bullbar. • As noted in the video, there wasn't a fairlead in the box, so always enquire about the supply of one, because you shouldn't use a winch without a fairlead, as it protects the winch rope from nicks or sharp edges on the bullbar. • During the winch tensioning, I measured the current draw by the winch and it was 136 amps....that's why you need to have your engine running when using your winch!! • If you like my videos and you would like to help support my channel, please consider buying me a coffee...your support is greatly appreciated , thanks. https://www.buymeacoffee.com/rustyadv... • Music credit: • Insiders by Joe Crotty | / joecrotty • Music promoted by https://www.free-stock-music.com • Creative Commons Attribution 3.0 Unported License • https://creativecommons.org/licenses/... • Higher Octane - Vans in Japan. • YouTube audio library • If you liked the video, please give it a Thumbs Up. If you would like to subscribe to the channel, hit the Subscribe button and hit the bell icon to be notified of upcoming videos. • Thanks for watching and I'll catch you in the next video.

#############################

New on site