Arctic Cat How To Series Clutch Removal HydroLock Method

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=BYkhgUA_51g

Welcome back to the channel everyone! • In today's Arctic Cat How to video I'm showing you just how easy it is to remove even the most stubborn of clutches from your sled! Old or not. I will not do it any other way after learning this trick from Louis over at Powermodz youtube channel. • If you feel like you are not fully capable of lifting your sled on it's side by yourself, Please Enlist Some Help for safety's sake! I do not want you to get hurt! • 1. After propping the sled up on it's Right Hand Side (RHS) and remove the clutch access plug in the belly pan. • 2. I simply remove the main clutch bolt by placing either the Arctic Cat Primary Clutch Spanner Tool [part # 0644-136] or a pry bar in the clutch and the appropriate sized ratchet and socket. • 3. I wrap my correct sized bolt with about 1.5 teflon tape tapered from the bottom up. • 4. Pour water into the center of the clutch mounting hole. • 5. Screw in the bolt, using fingers to start and then a ratchet and socket to screw the bolt in slowly until it pops off. It's THAT Easy! • Hope this helps you out! • Thanks for watching and come on back! • Don't forget to go by Louis youtube channel- POWERMODZ and check him out at: • / lshobie • Thanks for all for all of the continued support on the channel! • See you in the next video so come on back! • Take care and God Bless you and yours! • Sincerely, • Andrew C.

#############################

New on site