IDEAL Sure Test Circuit Analyser Demonstration and Review

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=Bbwh4n9hplk

Here is the link to the IDEAL SureTest product page. https://www.idealind.com/us/en/shop/p... • Ron introduces you to the SureTest® Circuit Analyzer from IDEAL. You can use it to test a circuit for proper wiring and performance under a load. The tester is really a great trouble shooting tool for problem circuits. • In this video I will show you how to quickly measure the line voltage, ground to neutral voltage, peak voltage and frequency of a circuit using Ideals SureTest Circuit Analyzer. • If you’d like to know more about Ideals Sure test Circuit Analyzer it is our catalog number 61-164. • Contact our customer service department or look at our website to find a distributor nearby you that stocks the circuit analyzer testers. • Simply plug the Circuit Analyzer into an outlet using the 1 foot extension cord provided with the tester or use the 1 foot extension cord with alligator clips that can be ordered separately onto a live circuit. • The tester indicates the polarity condition of the individual conductors when first plugged in. • To look at the line voltage of the circuit press the down arrow button once. The tester indicates the TRMS voltage of the circuit being tested. • TRMS testers are very accurate when measuring voltage or current waveforms and are recommended by the industry. • The line voltage measurement should be 120 VAC +/- 10% according to the NEC. • Voltage fluctuations can range between 108VAC and 132VAC and depending on the type of equipment the device should still work properly. • That fluctuation in voltage can be problematic depending on the type of equipment. • A lighting circuit probably won’t care but you data network might. • Pressing the right arrow button the tester will look at the ground to neutral voltage which should be less than 2 VAC. • In a single phase circuit, a higher ground to neutral voltage indicates excessive current leakage between the neutral and ground conductors. • This can be caused by connections between the neutral and ground conductors in a circuit in locations other than in the electrical distribution panel where the ground and neutral are bonded together. • Excessive ground to neutral voltage may result in inconsistent or intermittent equipment performance. And is one more thing to look at when trouble shooting equipment problems. • Pressing the right arrow button again and the tester will indicate the peak voltage of the waveform. • The peak voltage should be 1.141 times the RMS line voltage for a clean sine waveform. • It is generally about 170VAC for a 120 VAC circuit. Most people do not realize there is a peak voltage for that waveform. • Press the right arrow button one more time and the tester indicates the frequency of the circuit being tested. In North America that should be a frequency of 60Hz. • To learn more about Ideals SureTest Circuit Analyzer and how it can help discover wiring problems in buildings. Contact our customer service department or visit our website. • Thanks for watching folks! • I’m Ron with ideal industries. • #RonKipperFromIDEAL #IDEALINDUSTRIES #61-164SureTestCircuit Analyzer

#############################

New on site