Getting Started with the RTLSDR Software Defined Radio

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=C01wLvwjLIs

This video is an introduction to the cheap RTL-SDR. The RTL-SDR is a $30 Software Defined radio that packs a lot of functionality. • You can buy the whole kit here: • https://amzn.to/4fV79vV • The first thing you want to do once you get your device is familiarize yourself with the parts. • Different antenna Dipole configurations can be calculated here: http://www.csgnetwork.com/antennaedca... • Next you want to setup your software, so download the SDR Software package from this page: • https://airspy.com/download/ • Once the file is downloaded ,extract its contents and run the rtl-sdr bat file. • This will download the drivers needed to use the RTL-SDR. • Plug in your RTL-SDR, and wait a minute. • Open the new zadig file that was created once you opened that bat. • View- Show all Devices. • Select the Bulk-In, Interface (Interface 0) Device • Ensure the correct USB Id is shown: 0BDA 2838 00 • Install the WinUSB driver by clicking the install button. • The Drivers should now be installed, and you can open the SDRSharp Program included in the extracted folder. • Make sure to check out my blog, and shop over at: • https://themodernham.com . • ⚡ Join the ModernHams Discord: ⚡ • / discord • • ➡️Join this channel to get access to perks⬅️ • / @modernham

#############################

New on site