Acoustic guitar saddle how to cut the slot

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=CVhs92TmO8Y

http://www.stewmac.com/ • Dan Erlewine's working on a World War II era Gibson flattop. He explains that during wartime, some experienced factory guitar makers were replaced by temps. Maybe that's why this guitar's saddle was in the wrong place. Here's how he fixed it. • About the guitar in this video: This 1942 Gibson LG-2 is all mahogany. It's often called a banner model because of the peghead decal: a banner reading Only A Gibson Is Good Enough. • Music: Thanks to our friend, Dakota Dave Hull for the music! • If you have questions, please contact us through our webpage http://www.stewmac.com/email or visit our Facebook page / stewmac • Saddle Slotting Jig • http://www.stewmac.com/4043.html • Dremel • http://www.stewmac.com/0358.html • Micro Vacuum Hose Kit • http://www.stewmac.com/0523.html • Downcut Bits • http://www.stewmac.com/5154.html • Spool Clamps • http://www.stewmac.com/3715.html • Router Base • http://www.stewmac.com/5260.html

#############################

New on site