How to Replace a Gas Laundry Center Dryer Door Switch Kenmore Frigidaire

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=CjVSUPkC8XA

This video from Sears PartsDirect shows how to replace a broken dryer door switch in some Kenmore and Frigidaire gas laundry centers. When the dryer door switch is working correctly, it prevents the dryer from starting when the dryer door is open. If the dryer door switch is broken, it prevents the dryer from starting when the door is closed. To test the door switch, see if the drum light turns on and off when you press and release the door switch. If not, then the door switch is may need to be replaced. • Visit us at https://www.searspartsdirect.com?sid=soc:youtube:how-to-replace-a-gas-laundry-center-dryer-door-switch • Or call 1-800-437-1673 to speak with a parts specialist. • The video includes these parts. Look up your model to make sure you get the right parts for your laundry center. • Door switch • https://www.searspartsdirect.com/part... • Find parts for your laundry center at: • https://www.searspartsdirect.com/part... • Or click here to schedule an appointment with a repair technician. • https://www.searshomeservices.com/rep... • Transcript: • When the dryer door switch is working correctly, it prevents the dryer from starting when the dryer door is open. If it’s broken, it may keep the dryer from starting when the door is closed. To test the door switch, see if the drum light turns on and off when you press and release the door switch. If not, then the door switch is probably defective. Replace the door switch using the steps in this video. Before you begin, wear work gloves to protect your hands. Unplug the laundry center. Shut off the gas. Remove the front access panel mounting screws. Pull off the front access panel. Remove the control panel mounting screws. Pull the control panel down and forward to release it. Let the control panel hang by the wires below the front panel. Open the dryer door. Reach behind the front panel and squeeze the mounting tabs while pushing the door switch through the front of the panel. Disconnect the door switch wires. Connect the wires to the new door switch. Push the new door switch into the front panel. Push the control panel onto the frame and engage the locking tabs. Reinstall the control panel mounting screws. Position the front access panel on the laundry center frame. Reinstall the mounting screws. Plug the laundry center back in. Turn on the gas supply.

#############################

New on site