Youtor
AQUALINK SETUP
YOUR LINK HERE:
http://youtube.com/watch?v=CmiamZhtLOQ
Instructions: • Cable preparation 0:34 • #1 Remove protection • #2 Slide thermo-tube on the cable • #3 Bind wires with included 3m binders • #4 Heat thermo-tube with a heat gun or lighter 0:52 • Device initialization • #1 Attach battery to connector BAT1 1:02 • #2 Insert SIM card 1:15 • #3 Attach second battery to BAT2 1:19 • PC connection • #1 Connect the device to PC with included cable 1:36 • #2 Wave magnet where shown until LED starts blinking 1:46 • Firmware update • #1 Open Aqualinksetup, open tab Firmware update and click Select firmware 1:50 • #2 Select the update(.pkg file) • #3 Click Upload and wait for the process to finish (Wait for the light to go solid and start to blink again) 2:02 • Time update • #1 Open tab Firmware update and click Read clock from device, check if the clock matches the PC clock 2:11 • #2 If the time in the device is wrong clickSet time to update it 2:13 • Parameter setting • #1 Click Read all to read out current device parameters 2:16 • On the top left you set the server connection interval • The Periodic option allows the setting of interval between sendings in minutes • Beneath that you can set the communication type (SMS,GPRS or both) • Feed data - select the data saving option • GPRS/SMS settings • Alarms and cumulative • #1 Tick the active inputs 2:53 • #2 In the field upper limit pu in value for the alarm (max 257, 0 - disabled) • #3 In the filed cumulative enter the meters current index in number of pulses • #4 For each change on an input click save afterwards 3:18 • #5 When finished click send all 3:44 • Debugging • #1 Open tab System control 3:50 • Here you can see the current state of the device, signal and battery level • #2 You can save the record by pressing Save Record 4:00 • Tools : 4:30 • Send counter start values- force the device to send current input values to the server. • 4:46 send all- ssave all changes to device • Saving settings • You can save the current settings to a file by clicking File - Save device setting to file 4:51 • Assembly and mounting • 5:00
#############################
