Youtor
>> YOUR LINK HERE: ___ http://youtube.com/watch?v=D0i8zd_f0FA
Can you write me a review?: https://g.page/r/CdbyGHRh7cdGEBM/review • / mech-tech-simulations • / mech.tech.simulations • / mechtechsimulations • https://mechtechsimulations.com/ • WhatsApp: +91 9488469801 • UNIT II - ORTHOGRAPHIC PROJECTIONS OF PLANES • 1) A hexagonal plate of side 20 mm rests on the HP on one of its sides inclined at 45° to VP. The surface of the plate makes an angle of 30° with HP. Draw the front and top views of the plate. • 2) A pentagon of side 30 mm rests on the ground on one of its sides inclined at 30° to VP. The surface of the pentagon makes 50° with the ground. Draw the top view and front view of the pentagon. • 3) A square lamina PQRS of side 40 mm rests on the ground on its corner P in such a way that the diagonal PR is inclined at 45° to HP and apparently inclined at 30° to VP. Draw the projections. • 4) A pentagon of side 30 mm rests on the HP on one of its corners with the sides containing the corner being equally inclined to HP. The side opposite to the corner on which it rests is inclined at 30° to VP and is parallel to HP. The surface of the pentagon makes 50° to HP. • Draw the projections. • 5) A rectangular plate measuring 50 X 25 mm is seen as a square in the top view when it rests on one of its shorter edges on HP and perpendicular to VP. Draw the projections of the plate and find the true inclination of its surface with HP. Draw the front view of the plate when the edge about which it is tilted is inclined at 45° to VP. • 6) A circular plate of diameter 45 mm has the end P of the diameter PQ in the HP and the plate is inclined at 40° to the HP. Draw its projections when the diameter PQ appears to make 45° to the VP in the top view.
#############################
