How to measure flow rate

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=D2sabYjUDMg

EZ-Flo Howtos: • How to calculate Flowrate in Litres Per Minute, using a bucket and stopwatch: • Before installing your new EZ-Flo system, it is vital to ascertain how much water is passing through your system and making it onto the garden. • Steps: • 1. Connect desired watering appliance (such as hand nozzle, or sprinkler) to your hose. • 2. Prepare bucket and stopwatch. • 3. Open tap fully, and place in bucket when full flow is achieved. • 4. Start stopwatch, then fill bucket. • 5. Stop stopwatch when bucket is full. • 6. Close tap, and set aside bucket. • 7. Use the following formula to work out Flowrate: LPM=10x60/T • Explaination: Litres Per Minute (LPM) = • 10Litre Bucket, multiplied by 60, divided by seconds taken to fill bucket. • Example: 10x60/50=12 • If a 10 litre bucket takes 50secs to fill, your flowrate is 12 litres per minute • For best results, perform this test multiple times throughout the day, and use the average flowrate between tests. • Use this known flowrate to set your EZ-Flo mixture ratios correctly. • For more information, see http://ezfloinjectionsystems.com.au/ • Music Copyright: • Infados , Kevin MacLeod (incompetech.com) • Licensed under Creative Commons: By Attribution 3.0 • http://creativecommons.org/licenses/b...

#############################

New on site