How to set cruise control on JOYOR S series scooter

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=DEa-aqkLo38

Joyor electric scooter how to change the p settings to change km/h to mph, sleep time, turn cruise control on or off. • The full list of Joyor p settings are listed below, these may vary depending on model of Joyor scooter. The demonstration was on the Joyor F3, available from https://www.horizonmicromobility.com/ • Joyor electric scooter range available from Horizon Micromobility: https://horizonmicromobility.com/coll... • P01: rear light brightness: 1 – the darkest, 3 – the lightest; • P02: mileage unit, 0: km; 1: mile; • P04: sleep mode time: 0 – no sleep mode; 1-60 – sleep mode, minutes; • P06: wheel diameter: unit – inch; precision: 0.1; • P07: number of measuring magnets: range 1-100; change from 30 to 25 when removing the speed restriction. • P09: zero start, non-zero start setting: 0 – zero start; 1 – nonzero start; • P12: starting torque: range 0-5, 0 – the weakest, 5 – strongest; • P15: motor drive signal percentage settings: full speed is set to 100 • P16: cruise control function: 1 – activated, 0 – deactivated • P17: light settings: the lights are not lit automatically when the vehicle is on, 0 – the lights are lit automatically when the vehicle is on • P99: Reset. Press and hold the MODE button for 5-6 seconds to reset all the parameters back to the initial settings.

#############################

New on site