Thunder Laser Hacks 5 Tips for Using RDWorks

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=DMWTuW1aldc

1. Array copy • When you need to make a lot of the same pattern, use it and set a reasonable spacing that can be complete to make the pattern full coverage of the entire material. • 2. Delete overlap • After importing a design, there may be a very large number of overlapping line segments, so a lot of work time can be saved by removing overlapping line segments. • 3. Curve auto close • When we import a design, there may be some areas that are not yet closed due to RDworks recognition issues, which usually causes the fill to fail, once we connect the curves, it will fill properly. • 4. Curve Smooth • We can smooth the connected curves and this effect can be applied multiple times, this effect can also be used for rectangles. • 5. Combine curve • Two different line segments can be joined, and after the joining is done, there may be many duplicate line segments that need to be deleted. • For more Info click here👉:https://www.thunderlaser.com/ • Follow us for more info: • Facebook: / thunderlaser.official • Instagram: / thunderlaser.official • Pinterest: / thunderlaser_official • Linkedin: / thunderlaserofficial • Tiktok: / thunder.diy.design • Facebook Group: / thunderlaserfans • #thunderlaser #lasercutting #laserengraving #lasermachine #tutorial #diyprojects #hacks #tipsandtricks #RDWorks

#############################

New on site