Simple Multi Motor Setup for Newbies

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=DP97BhZcXQE

Simple Multi Motor Setup for Newbies • In this video I will go over a very simple way to set up electronics for a multi motor electric RC model airplanes. In short, a simple multi motor setup for newbies. • There are several way to set up a multi motor setup for an RC airplane using various combinations of electronic speed controls (ESC) and batteries. To keep things simple I will use a two motor application with an ESC and lipo battery for each motor. This is one trick where you must disconnect the battery eliminator circuit (BEC) from one of the ESC, and I will demonstrate how to easily do this. • I will also discuss the proper way to lengthen the battery wires. See video below for a more detailed discussion of this for brushless electric motors. • I am in the process of designing a foam board RC model airplane for two engines. This model will be the subject of a separate video. • Extend ESC wires video: • • How to Extend ESC Wires Correctly • Here is a link to my YouTube Channel: • / timmckay56 • Many thanks in advance for a post of this video on Facebook, it truly helps the channel a lot! • Regards, • Tim • Chapters • 00:00 - Intro • 00:17 - Project overview • 01:11 - Motor and ESC discussion • 02:15 - BEC discussion • 04:53 - Cutting the BEC wire • 06:02 - Lengthen the wires • 07:40 - One or two batteries and ESCs • 08:55 - Mulit motor demonstration • 09:56 - Twin engine RC model airplane • 12:07 - Conclusion

#############################

New on site