Programming DIY on LED Strip Remote

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=DhYKxqmSdEk

DIY functions on remote are for specific custom colors. Unfortunately, you cannot program sequences or anything else with these buttons. However, if you prefer a specific color to be steadily on you can adjust the LEDs till you reach that color and save it to one of the six DIY buttons. • Step one: • While on press one of the six DIY buttons • -DIY 1 (should be white by default) • Step two: • Press the down arrow keys of the red, green, or blue scheme. You should notice the LEDs now changing from the default white. Once this initiates, you can adjust either up or down from the color schemes to create your desirable color • Step three: • Press the same DIY button again (DIY 1). That color should now be saved as DIY 1. You can now use the other functions, such as fade. If you want to go back to your preset color glowing solid, press that DIY 1 button, and it should return. • • Product shown: • DAYBETTER Led Strip Light Waterproof 600leds 32.8ft 10m Waterproof Flexible Color Changing RGB SMD 5050 600leds LED Strip Light Kit with 44 Keys IR Remote Controller and 12V Power Supply https://www.amazon.com/dp/B01IQOV13G/... • I'm not paid or sponsored by them, just was frustrated figuring DIY out. Pretty sure there are other companies with the same remote that are programmed the same way. • Hope this helps and clears your frustrations! • *Update: Adapter available on Amazon to control over wifi with phone. Allows easier color changes and more modes including different colors available for flash mode. https://www.amazon.com/dp/B07116SX41/...

#############################

New on site