How to Crimp F Connector to RG59 Coax Cable

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=EB2oSFhtNNU

http://cctvcamerapros.com/crimp-f-con... - This video demonstrates how to attach a crimp-on type F connector to RG59 coaxial cable. A BNC screw-on connector is also attached to the F connector for use in CCTV installations but this part is optional. • Here are the steps. • 1) Using a coax cable stripper, remove the outer layers of the RG-59 cable. The TL-22 cable stripper from CCTV Camera Pros is pre-adjusted to cut the cable in the exact locations and depths. • 2) Peel back all of the copper braided shielding and make sure none is left touching the dielectric insulator or center core. • 3) Firmly place the crimp-on F connector onto the coax cable. The center core and dielectric insulator are placed inside the inner cylinder of the connector. The copper braiding is placed on the outside. • 4) Place the grip rings of the F connector inside the .324 inch setting of the TL-70 coax cable crimping tool and ratchet it down all the way. • 5) Confirm that you have a snug connection by giving it a few tugs. • 6) If you are using your RG59 cable for a CCTV system installation, you probably need a BNC connector on the end. If you do, you can use a BNC screw-on type connector to attach to the F connector.

#############################

New on site