Youtor
Saeco PicoBaristo Troubleshooting Service code Error 5 appears on the display
>> YOUR LINK HERE: ___ http://youtube.com/watch?v=E_jmyQ1xA-s
Visit http://saeco.com/care for more information • ------------------------------------------------------------------------- • As there can be different causes. • One of the following solutions might work for you: • · Remove coffee beans under the water tank • · Rinse the brew group • · Remove the AquaClean filter • · Dispense hot water • · Descale the machine if possible • If the machine shows ‘Error 05’ on the display one of the following solutions might work for you • Set the main switch on the back to OFF ‘’O’’ • 1. Remove coffee beans under the water tank • Open the water tank lid and remove the water tank • Remove any loose coffee beans in this area • 2. Rinse the brew group • Open the service door • Press the PUSH button to the side hold it and pull the grip towards you • Rinse the brew group and let it air-dry before placing it back • Place back the brew group and close the service door • 3. Remove the Philips AquaClean filter • Remove the AquaClean filter • Refill the water tank • And place it back into the machine • Press the ON/OFF button to switch the machine ON • Press the ON/OFF button to switch the machine ON • Brew an espresso • If this works, make sure the filter is well prepared before placing it back. Hold the filter upside down in a jug with cold water until no air bubbles come out • Hold the filter upside down in a jug with cold water until no air bubbles come out • Place back the prepared filter and brew an espresso • If this still does not work, the filter might be clogged and needs to be replaced • 4. Dispense hot water • Set the main switch on the back to OFF ‘’O’’ and then ON ‘’-‘’ again • Press the HOT WATER button and dispense two cups of hot water • Discover more at: • Saeco website: http://www.saeco.com • Facebook: / philips • Twitter: / philips • YouTube: / saeco
#############################
