DIY Hand Wire Stripper Strip Copper Cables Quick amp Easy

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=Ee5Wm2UvXe4

with this tool I made you can quickly and easily strip wires. You can adjust the hight of the blade and you may also adjust the width for the cable diameter by using bearings with larger inner diameters or by drilling slotted holes for them (instead of just 8mm holes). • very easy to use: simply push the cable inside from behind and then pull it through with one hand while holding the handle with the other one. • very quick: strip cables within no time! in the example I pulled through a 6 mm diameter cable of 64 cm length within just a few seconds. • tools and materials used: 7, 10, 13 mm wrenches, 6 mm drill (with drilling machine, you may also have to use other sizes and tap drills if your parts don't already have the necessary holes as shown here), phillips screwdriver, 2x comb pliers. Materials: as shown in first few seconds of the video. Most important: blade part of a cutter, other parts same or similar according to your choice) • #wirestripper #wirestrippingmachine #copper #recycle #scrapmetal

#############################

New on site