Tutorial Out Of Autoclave PREPREG Carbon FiberFibre Part 17 Introduction

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=Ef2nEStH_8E

FACEBOOK: / mat2composites • TWITTER: @matthieutje65 • INSTAGRAM: MatthieuLibeert • WEBSITE: http://www.matthieulibeert.webs.com • Links: • VOSSCHEMIE: http://www.vosschemie-benelux.com • • New video online every Wednesday at 18:00 Belgian time! • Schedule: • 1 January 2014 • Tutorial: Out Of Autoclave PREPREG Carbon Fiber/Fibre Part 1-7 (Introduction) • https://www.youtube.com/watch?v=Ef2nE... • 1 January 2014 • Tutorial: Out Of Autoclave PREPREG Carbon Fiber/Fibre Part 1-7 (Introduction) • https://www.youtube.com/watch?v=Ef2nE... • 8 January 2014 • Tutorial: Out Of Autoclave PREPREG Carbon Fiber/Fibre Part 2-7 (CNC+2K Paint) • https://www.youtube.com/watch?v=fWiPl... • 15 January 2014 • Tutorial: Out Of Autoclave PREPREG Carbon Fiber/Fibre Part 3-7 (Casting ALU VG) • https://www.youtube.com/watch?v=WzvLM... • 22 January 2014 • Tutorial: Out Of Autoclave PREPREG Carbon Fiber/Fibre Part 4-7 (Prepreg mould) • • Tutorial: Out Of Autoclave PREPREG Ca... • 29 January 2014 • Tutorial: Out Of Autoclave PREPREG Carbon Fiber/Fibre Part 5-7 (Complex moulds) • • Tutorial: Out Of Autoclave PREPREG Ca... • 5 February 2014 • Tutorial: Out Of Autoclave PREPREG Carbon Fiber/Fibre Part 6-7 (First Parts and Clear) • • How I Make My Carbonfiber Tutorials! • 12 February 2014 • Tutorial: Out Of Autoclave PREPREG Carbon Fiber/Fibre Part 7-7 (Silicone bag and parts) • • Tutorial: Out Of Autoclave PREPREG Ca... • • Hi Everyone, After the succes of a previous 6-part tutorial from mouldmaking till prepreg parts, here are some new ones! you can see the introduction of the previous tutorials by clicking on following link: • Introduction On Split-moulds and Prep... • In the videos coming online you will get some information on 2K spraypaint, How the first moulds were CNC-Milled, The use of Vosschemie VG ALU EPOXY, using Prepreg Carbonfiber to make moulds, how an other mould was made to enable silicone vacuumbags, how parts are clearcoated and many more. So if all of this sounds interesting, don't forget to subscribe ;)

#############################

New on site