Youtor
QuickStart Part 1 – Overview and Software Setup
>> YOUR LINK HERE: ___ http://youtube.com/watch?v=EoaZ1_6GNKg
A demonstration of how to connect a computer and Campbell Scientific datalogger, and enable communication between them using EZ Setup, direct connect. Also included are basic connection troubleshooting: connection, power, COM, and PakBus address. Includes editing EZ Setup settings. • Follow along with the QuickStart section of your datalogger manual. • In this 4-part video tutorial series we'll go through the steps to quickly get your Campbell Scientific system up and running. • Part 1 - Get your datalogger connected to and communicating with your computer. • Software used: EZ Setup in LoggerNet, PC200W or PC400W. • Part 2 - Write a program for the datalogger to read a sensor and record measurements. Wire the sensor to your datalogger. • QuickStart (Part 2) – Programming wit... • Software used: Short Cut in LoggerNet, PC200W or PC400. • Part 3 - Send that program to the datalogger, view real-time measurement values, collect and view data. • • QuickStart (Part 3) – Use LoggerNet t... • Software used: LoggerNet • Part 4 - Send that program to the datalogger, view real-time measurement values, collect and view data. • • QuickStart (Part 4) – Use PC200W to S... • Software used: PC200W. • PC200W download: https://www.campbellsci.com/19_1_9999_87
#############################
