Youtor
Meet LifeSized Humanoid Robot Mark 1
>> YOUR LINK HERE: ___ http://youtube.com/watch?v=EyUuSGSgn1A
Why does my Litter-Robot stop mid-cycle? If your Litter-Robot 3 stops mid-cycle, check out this helpful troubleshooting video to help remedy the problem. • We’ve put together this short video that clearly demonstrates common issues that may cause your Litter-Robot to stop mid-cycle and before it has completed a full cleaning cycle. • The actions needed to solve this problem are often quick and easy. Chances are, it will take only a few minutes to get your Litter-Robot working perfectly again. Watch this video if you are experiencing any of these issues: • Litter-Robot not cycling • Litter-Robot stuck mid cycle • Litter-Robot won't cycle • The problem might be as easy as changing the surface your Litter-Robot is placed on, positioning your Litter-Robot so it isn’t touching the surrounding walls, or reducing the amount of litter used in the box. • If your Litter-Robot continues to stop mid-cycle, the problem could be caused by a continuous activation of the cat sensor, indicating excess weight in the waste drawer. In this case, a thorough Litter-Robot cleaning should do the trick. Learn how to deep-clean your Litter-Robot 3 with our dedicated article and video: • • How to clean Litter-Robot 3 - Deep cl... • https://www.litter-robot.com/support/... • Another reason your Litter-Robot stops mid-cycle could be due to an obstruction that has activated the “anti-pinch” safety feature — a feature that has been installed to ensure your cat’s safety when he or she uses the Litter-Robot. Learn more about how to fix the pinch detect system on our dedicated article and video: • • Checking For A Pinch Detect Fault | L... • https://www.litter-robot.com/support/... • This short Litter-Robot troubleshooting video discusses what to do if any of these scenarios arise, with helpful step-by-step instructions for troubleshooting identification, obstruction removal and more. • 🕒 Timestamps: • 00:00 Intro • 00:10 Basic checks • 0:54 Turn Litter-Robot off and remove the bonnet • 01:07 Manually rotate the globe to the home position. • 01:19 Replace the bonnet and secure it in place • 01:47 Start a new clean cycle • 02:02 Blinking yellow and solid red lights • 02:59 Litter-Robot reverses direction • 🛠️ Support Articles: • Litter-Robot 3: Pinch Contact Installation Guide • https://www.litter-robot.com/support/... • Litter-Robot 3: Buttons and lights troubleshooting • https://www.litter-robot.com/support/... • Visit our support center for more helpful articles: https://www.litter-robot.com/support/ • Warranty information: https://www.litter-robot.com/explore/... • If you are under warranty, you can access replacement parts at no cost. Order a one-time replacement from your account. • Subscribe for more tips and troubleshooting guides to keep your Litter-Robot running smoothly! 🐱✨ #LitterRobot #CatCare #TroubleshootingTips • https://www.litter-robot.com/
#############################
