GMS M114T AR US10B Replacement Mortise Thumb Turn

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=F4YHEFG-AuM

Please find this product at http://absupply.net/ • This video is to bring you a closer look at the GMS 114T AR US10B Replacement Mortise Thumb Turn. The M, M stands for mortise in the part number. The 114 means it's 1.25 inch length. Let's get the tape measure. Mortise cylinders are always measured from the underside of the head to the back of the cylinder which includes the CAM. You can see that its 1.25 inches. The T means that its a thumb turn, as you can see. The GMS thumb turns are really nice, very smooth acting, they feel very solid, feel very well made. It has an Adams Rite CAM on the back. Okay. US10B finish which is an oil rubbed bronze finish. 1.25 inch mortise cylinders thumb turn applications can be used for lots of applications where you would have a thicker than standard door, because an 1.25 inch is a little bit long for a lot of applications. Thicker than standard door with a mortise lock or Adams Rite hardware obviously because you've got an Adams Rite CAM, you would probably be using it with something Adams Rite. You've got an application where maybe you need a thumb turn, maybe you're removing a cylinder, and maybe you're removing a cylinder and have a very thick cylinder collar that you want to use, that you would need a longer cylinder for that sort of application. Available in oil rubbed bronze and satin chrome by GMS, available in 1-1/8 , one inch lengths in a thumb turn. Typical mortise thumb turn. If you have any questions on the GMS M114T AR US10B, sorry I'm trying to get the camera to focus back in on that, or any other GMS product, please feel free to reach out to us. Thank you very much.

#############################

New on site