Filing the Fret Ends of My Telecaster Custom ShopStyle Build

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=FiPboNCgtm8

In this video I discuss how I prepped the neck of my Telecaster guitar build before the applying the nitro tint and lacquer. I use household tools that make the job easy, but effective! • Below are the specs on the neck: • HEAD SHAPE: Tele® • ORIENTATION: Right Handed • SCALE LENGTH: 25.5 Standard Fender • NUMBER OF FRETS: 21 Fret • NUT WIDTH: 1.650 (41.91mm) • HEEL WIDTH: 2-3/16 (55.56mm) Standard Fender • TUNER HOLE SIZE: 11/32 Vintage Kluson • TRUSS ROD TYPE: Single Acting Adjust at the Heel • FB RADIUS: 9-1/2 • NUT SLOT STYLE: 1/8 Standard Fender Flat Bottom Style • SHAFT WOOD: Rock Maple • TOP DOTS INLAY: Black Plastic • BINDING: None • SIDE DOTS: Black Larger 3/32 • 12TH DOT SPACING: Wide (Vintage Pre 64) • FRET WIRE SIZE: Nickel Silver 9055 Medium Tall • FB EDGES: Semi Rolled Standard • BACK PROFILE: LP59 87 97 • FINISH: Raw (No Warranty) • MOUNTING HOLES: Do Not Drill Mounting Holes • COMMENTS: *Thinner skunk stripe *Tight vintage headstock scoop (for rounded walnut plug) • / ncsink • http://www.cdbaby.com/Artist/NathanSink • https://play.spotify.com/artist/5X9hJ... • https://itunes.apple.com/us/artist/na... • #telecaster #roadworn #neck

#############################

New on site