How to change the Time Format setting on the 3DTriSport Pedometer

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=FwOtyZ_TJuo

FAQ / TROUBLESHOOTING: How to change the Time Format setting on the 3DTriSport Pedometer ( 12Hr or 24Hr ) • ✳️ NOTE: If you choose 12 hour time format ( 12Hr ), the time will display as 01:00 PM. If you choose 24 hour time format ( 24Hr ), the time will display as 13:00 hours. • ✳️ NOTE: When you enter setup mode (blinking 12hr or 24Hr icon) your pedometer will exit setup if no buttons are pressed for more than 10 seconds. • 1. Make sure that you are in the correct Step Mode. Setup/settings can only be accessed from Step Mode. Hit the MODE button until you see the 'Step' icon at the top of the display and the default Time under the line. '-01 Days Record' icon must not be displayed (If you do see '-01 Days Record', hit the MODE button twice to get to Step mode). • 2. Hold down SET and release when you see 12Hr / 24Hr blinking. • 3. Hit MODE to switch '12Hr' or '24Hr' time format. • 4. Leave your pedometer idle for 10 seconds to exit setup mode. Your changes are saved and your pedometer will be back in Step mode. • ✳️ For a detailed demonstration and explanation of all settings please watch the full setup video using the link below: • • Setup Video for the 3DTriSport Pedome... • ✳️ CUSTOMER SUPPORT: • Need help with your Pedometer? • Contact us by visiting - https://realalt.com/support • ✳️ CONNECT WITH US: • Website - https://realalt.com

#############################

New on site