How Clint Eastwood Ruined Sondra Lockes Career

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=FzWu2nOJ614

Electrician Scott Caron helps a homeowner upgrade her kitchen with new LED lights and electrical outlets. • #ThisOldHouse #AskTOH • SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse • Shopping List for How to Install Undercabinet Lighting and Power: • LED undercabinet light fixtures • Outlet strips, to provide undercabinet electrical outlets • Old-work electrical boxes, to house wires and wall switch • Nonmetallic electrical cable, for powering new lights and outlet strips • Blank plate, to conceal wires in junction box • Electrical tape, to secure cable to fish tape • Twist-on wire connectors, for securing wire connections • Dimmer wall switch, to power new lights and outlet strip • Tools for How to Install Undercabinet Lighting and Power: • Jigsaw, for cutting through cabinet back • Drywall saw, to cut through drywall • Screwdriver, for tightening screws • Torpedo level, to mark level and plumb cutlines • Pliers, for gripping and twisting • Cordless drill, to drive screws • Fish tape, for pulling cable through walls • Wire strippers, used to strip off wire insulation • Steps for How to Install Undercabinet Lighting and Power: • 1. Go to the main electrical panel and turn off the power to the existing undercabinet lights and outlets. • 2. Unscrew the old light fixtures from the underside of the cabinets. • 3. Use a jigsaw to cut a hole in the cabinet back for an old-work junction box. • 4. Cut a similar hole in the wall directly above the cabinets. • 5. Push two nonmetallic electrical cables through the upper hole and down into the hole cut inside the cabinet. • 6. Cut a hole in the kitchen wall for an old-work switch box, then use a fish tape to pull a cable into the hole. • 7. Push the ends of the cables through the rear of the switch box, then screw the box to the kitchen wall. • 8. Wire a dimmer switch into the box; be sure the switch is designed for use with LED lights. • 9. Make the wire connections in the junction box inside the cabinet. Screw a blank cover onto the junction box. • 10. Make the wire connections inside the light fixtures, then screw the fixtures to the underside of the cabinets. • 11. Run a new cable to the wall beneath the cabinets, then install the 120-volt outlet strips. • 12. Make the final wire connections at the outlet strips and test your work. • About This Old House TV: • This Old House is the No. 1 multimedia home enthusiast brand, offering trusted information and expert advice through award-winning television, a highly regarded magazine, and an information-driven website. This Old House and Ask This Old House are produced by This Old House Ventures, LLC and are presented on PBS by WGBH Boston. • Follow This Old House and Ask This Old House: • Facebook: http://bit.ly/ThisOldHouseFB • Twitter: http://bit.ly/ThisOldHouseTwitter • http://bit.ly/AskTOHTwitter • Pinterest: http://bit.ly/ThisOldHousePinterest • Instagram: http://bit.ly/ThisOldHouseIG • Tumblr: http://bit.ly/ThisOldHouseTumblr • How to Install Undercabinet Lighting and Power | All About Lights | Ask This Old House • / thisoldhouse

#############################

New on site