7Chambers MoM Magic of Myth with a Custom Tierfon Orbital Crystal reveal

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=GYxTD_f_Ajk

Anyone who has successfully installed a MoM the correct way and come out the other end unscathed with all of their hair intact will tell you it is not a walk in the park, run of the mill install. There are a lot of things to take into account, from the static internal battery wiring, to the near surgery like handling needed for the helper board (which as a friend very adequately put it recently- ‘the helper boards are very far from helpful). With all of that being said, the MoM from 7C is the most accurate looking, and most beautiful installable specimen for Lukes cave scene hilt in existence in my opinion. I went about designing a special reveal crystal chamber chassis for this well over a year ago and it was a treat to be able to revisit this with a new pair of eyes and a little more experience under my belt. • The crystal chamber was printed in polished brass, then weathered. The lower part of the chamber has a 3D printed resin insert with an 11 neopixel ring from Shtok for some animation. There Is a rose quartz in the upper part of the chamber with a single neopixel above it for animation. I have set this up with a USB C charging module accessible under the pommel, as well as a speaker pod housing a speaker pogo set from Smugglers outpost. • Thin neck was re-painted by me with Ace Antique gold, and the reveal board was also assembled by myself. • • Specs: • Proffie v3 • 28mm Dark Side Bass Speaker and speaker pogo set from ‪@SmugglersOutpost‬ • Custom Crystal Chamber reveal by Me • Lit PCB Emitter by ‪@ccsabers‬ • USB C Charging Module

#############################

New on site