Ledwell Operational Series Auger amp Drag Chain Bulk Haul Feed

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=G_RopnYK6d0

Maximize efficiency when operating a Ledwell Bulk Haul Feed Truck or Trailer by following the proper steps to load and unload. • To get started, walk around the entire trailer to inspect the following: • Overhead and ground obstructions • Hydraulic Valves in the neutral position • Hydraulic and Air Hoses • Lights • Wheels and Tires • Remote control • TO LOAD: • Pull up to the mill and position as needed. • Check that your bottom doors are closed. • Open the top doors • Fill the bins of the trailer. • TO UNLOAD: • Engage the PTO • Push raise and out on the remote to move discharge boom away from the trailer • Use the remote control to position the discharge over the silo. • Push discharge on • Push floor on • Open the bin closest to the rear – remembering to unload from back to front. • Leave each door open as you move forward. • Check the discharge gauge – it should be around 1400 PSI for 9x9x9 or 1900 – 2000 for 12x12x12. • Check the floor gauge – the PSI should be around 1000 to 1500 for an Auger system – the PSI will depend on which bay you are pulling from or 600 PSI for a Drag Chain from any bay. • Adjust flow control on the floor to achieve 1400 PSI on the discharge gauge – the PSI will vary depending on feed type. • As the bin empties, the pressure will drop on gauges – this is how you will know to open the next bin. • Once all bins are empty, Push the floor off. • Push discharge off • Push lower and in to place the discharge boom back in the saddle • Make sure to close all bottom doors. • For more information, scan the QR code at the front of the trailer or visit https://ledwell.com/ • See index of operational videos - https://bit.ly/2wxwWda • ********** • Subscribe and hit the bell to be notified when new videos premiere - https://bit.ly/2POTMDS • ********** • CONNECT WITH US • FACEBOOK - / ledwellandson • INSTAGRAM - / ledwellandson • LINKEDIN - / ledwell- -son-enterprises-inc. • TWITTER - / ledwellandson

#############################

New on site