ASA vs PLA 3D printed bolts and screw nuts

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=GiZRXbP8s3E

Let's compare PLA vs ASA 3D printed bolts and screw nuts. ASA (Acrylic Styrene Acrylonitrile) is a technical material that is considered a successor to ABS. ASA is UV resistant and has higher heat deflection temperatures, but it is harder for printing, it requires higher temperatures, brim and some enclosure. This test is not only about ASA or PLA 3D printed bolts, but more about understanding properties of these materials. • Materials I used in this test: • Gembird PLA printed on Prusa MK3s • Prusament ASA printed on Ender3 V2 • Ender 3 V2 on banggood (affiliate): • https://www.banggood.com/custlink/GGv... • Creality small enclosure (affiliate): • https://www.banggood.com/custlink/3KK... • Digital torque wrench (smallest 0.3-30 Nm) • https://www.banggood.com/custlink/mD3... • Contents: • 0:00 in this video • 0:22 introduction • 2:12 designing bolts and nuts in Fusion360 • 3:00 cutting the bolt in slicer • 3:24 3D printing PLA and ASA • 4:49 analyzing bolts and nuts • 9:00 pulling (tensile) test for bolts • 9:43 tensile test results • 9:53 shear stress for bolts • 10:34 shear tests results • 10:44 torque test for bolts • 11:43 bolt torque test results • 11:52 pulling test for nuts • 12:30 results of nut pulling test • 12:40 torque test for screw nuts • 13:49 results of nut torque test • 13:54 impact test • 15:22 results of impact test • 15:28 temperature test • 16:03 conclusions • Mentioned videos: • Horizontally 3D printed bolts without supports: • • Testing horizontally 3D printed bolts... • 3D printed object inside car - temperature test • • What 3D printing material to use for ... • FDM vs SLA test: • • FDM vs SLA 3D printed bolts and nuts ... • Support my work over Patreon: • / mytechfun • or (PayPal link available): • http://www.mytechfun.com/donation

#############################

New on site