My first 3D printer JGAURORA A5 with setup tipps

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=GyJUxmdYdU4

This printer was send to me by gearbest.com to review. • If you want to support me, you can order your JGAURORA A5 with the following link: • https://www.gearbest.com/3d-printers-... • • Step by step to a better 3D print with the JGAURORA A5 • 1) Assemble your printer and perform the bed leveling • 2) Install Ultimaker Cura on your computer • or replace the software directory name on the USB drive with the chinese characters with english letters • and install the delivered software. • https://ultimaker.com/en/products/ult... • Use the ini_file from the JGAURORA A5 USB Stick to setup Cura for the 3D printer. • 2) Start a string test • https://www.thingiverse.com/thing:288... • To find a setup with no strings the following tips may help • lower printing temp (to hot will result in fine strings) • faster retraction speed (75mm/sec) • make sure that retraction is actually enabled in cura • correct retraction length (4mm was perfect for my filament) • find the correct Flow % for your filament ( 93% was perfect for my printer with the included filament) • The flow is different for each filament • Some filaments are simply prone to stringing and no matter what you do it might be all but impossible to completely eliminate them. • Even different colors from the same manufacturer can differ in how much they string. • Troubleshooting: • https://www.simplify3d.com/support/pr... • http://support.3dverkstan.se/article/... • 3) Print and install a better cooling duct • https://www.thingiverse.com/thing:275... • 4) Print and fine tune with the calibration cat • https://www.thingiverse.com/thing:154... • 5) If your printer setup is done, you are able to print such amazing things like the Print-In-Place Iris Box • But read the Post-Printing comments on thingiverse • https://www.thingiverse.com/thing:181... • • 5) You will find on thingiverse thousands of interesting files to print • https://www.thingiverse.com • • 6) The Unofficial JGAURORA wiki: • https://jgaurorawiki.com/a5/modificat... • • My main pros for the jgaurora a5 • very good price/performance ratio (May 2018) • Pre assembled • – Big build volume 305 x 305 x 320 mm • – Resume option (power failure recovery) • – Filament monitoring sensors • perfect working 2.8 Color touch screen • Print bed BDG heated platform (work perfect without tape or other things) • • The Song is: • Lights by Sappheiros / sappheirosmusic • Creative Commons — Attribution 3.0 Unported — CC BY 3.0 • http://creativecommons.org/licenses/b... • Music promoted by Audio Library • Lights – Sappheiros (No Copyright Music)

#############################

New on site