Youtor
FlashShield Installation Manifold Bracket
>> YOUR LINK HERE: ___ http://youtube.com/watch?v=H80JWXz90ig
Download our DIY Manual • https://www.avantgardeglass.com.au/di... • Call Us On: 02 8840 3934 • Thank you for checking out our DIY Glass Balustrade Guide. This guide will allow you to slash up to 40% off your glass balustrade project with our easy to follow, step-by-step instructions. • *DISCLAIMER* • This guide is to be used for information purposes only, and is not intended to be taken as job specific installation advice. As every job is different, we can not account or be held liable for anything that may arise from using the information in this guide such as drilling through pipes or live wires, waterproofing issues or safety issues. This guide assumes that you have taken all necessary precautions such as wearing the required safety equipment, are aware of any services located along your installation area. • If not make sure to dial before you dig. • By using this guide, you acknowledge the above and agree not to hold Avant-Garde Glass and their associated entities liable for any issues that may arise directly or indirectly from using this guide. • NOTE: If you need help working out your panels, the DIY Manual has a full walkthrough or you can contact us to do it for you completely free! • https://www.avantgardeglass.com.au/di... • TOC • DIY Glass Balustrade Installation Guide: 0:24 to 6:35 • Step 1: Marking out the job site 0:48 • 1.1: Run chalk line 100mm in from edge of surface 0:56 • 1.2: Mark out panel edges and gaps as per layout 0:59 • 1.3: Mark out spigot spacing 1:07 • 1.4: Mark out core holes 1:19 • Step 2: Core Drill Spigot Installation 1:35 • 2.1: Score core holes 1:45 • 2.2: Mark out core hole depth 2:05 • 2.3: Turn water on to slow trickle 2:10 • 2.4: Core drill spigot hole: 2:18 • 2.5: Remove Core Bit - Must See Tip Included 2:25 • STEP 3: Leveling Surface • 3.1: Level job site with timber blocks and window packers 3:09 • 3.2: Use 2m level, check blocks are constant throughout job site 3:18 • STEP 4: Prepare the Glass Balustrade 3:23 • 4.1: Mark spigot location on glass 3:27 • 4.2: Secure spigot onto glass 3:44 • 4.3: Fix cover plate to the glass 3:59 • STEP 5: Installing the DIY Glass Balustrade 4:13 • 5.1: Line up glass on blocks 4:17 • 5.2: Attach struts to glass 4:37 • 5.3: Clamp Glass together: 4:50 • STEP 6: Mixing and Pouring Kwixset Grout 5:10 • 6.1: Mix grout as per bucket instructions: 5:20 • 6.2: Pour grout into core hole 5:34 • 6.3: Wait for grout to set 5:47 • STEP 7: Wipe down glass 6:08 • Get help with your layout - 02 8840 3934 • Find us at • Address: 1 McIntyre St, • Gordon NSW 2072 • Mobile: 0420 519 322 • Email: [email protected] • Facebook: / avantgardeglassswimmingpoolfencingsydney • Music: from Bensound.com
#############################
