CATIA V5 Tutorial 37 Helical Gear Advanced

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=HznHOU5oTlk

A CATIA V5 advanced tutorial on how to create a helical gear. In this tutorial, we will be using the Part Design, Generative Shape Design, and Sketcher Workbenches to create the 3D CAD model. The version of CATIA used in this video is CATIA V5 R21; unless otherwise specified, all dimensions are in inches. The left click rings are red and the right click rings are yellow. • If this video was helpful, please click the like button and/or leave a comment, thanks for watching! • ► Part Volume: • Helical Gear = 1.291795 in3 • ► Timestamps: • 00:00:00 Create a New CATPart Create a Sketch for the Base Circle • 00:00:40 Exit the Sketch Pad • 00:00:58 Sketch the Base, Pitch, Root, Outside Diameter • 00:02:08 Sketch the Pressure Angle • 00:02:48 Finish Sketching one Gear Tooth, Exit Workbench • 00:04:36 Switch to the Generative Shape Design Workbench, Create one Point • 00:05:08 Use the Helix Command to Define the Helix Angle • 00:06:13 Switch Back to the Part Design Workbench, Use Rib to Create one Gear Tooth • 00:07:00 Create the Gear Teeth With Circular Pattern • 00:07:36 Add one More Pad • 00:08:11 Create a Pocket for the Shaft Diameter Keyway • 00:09:31 Finish up With an Edge Fillet Chamfer • ► Playlist for CATIA V5 Beginner Tutorials: • • CATIA V5 Beginner Tutorials • ► Playlist for CATIA V5 Advanced Tutorials: • • CATIA V5 Advanced Tutorials • ► Playlist for Mechanisms: • • Mechanisms • • #catia #catiav5 #catiav5tutorials

#############################

New on site