Washing Machine Dryer Controller Board Repair LNK305 Failure

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=IJEkP6iIN2E

A tale of synchronicity and obviously planned obsolescence … • ↓↓↓ Complete description, time index and links below ↓↓↓ • So one week the washing machine of a friend of mine gave up on him. He was able to isolate the fault to a fried switch mode voltage regulator on the controller board. A resistor and an inductor were gone too. • The week after that I was talking to the owner of a dead dryer. Guess what: the voltage regulator on the controller board, a resistor and an inductor had it. Fortunately there are repair kits for that controller board on eBay … • 00:00 Intro – a dead washing machine and a non-matching inductor value • 02:48 Schematic – from the datasheet of the LNK305 • 06:41 Desoldering – the dead parts, plus a tale of synchronicity • 16:09 Post mortem – blown resistor, exploded chip and inductor with tiny gash • 17:48 Soldering – the new parts • 20:10 Success – it’s alive • 20:32 Remark – about the packaging of the spare parts from eBay • Repairs: • Repairs • Mailbag: Instrument Case, Lead Bending Tool, Assortment Box and Hot Plate: • Mailbag: Instrument Case, Lead Bendin... • #robertssmorgasbord #repair #fix #LNK305

#############################

New on site