OpenFoam Tutorial 5 Turbulent Flow in a Pipe with Salome as Mesher

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=IJLROB28nXE

Let's Talk about Openfoam, Salome and Turbulent Flow Simulation :) • In this 5th tutorial, we will look into how to build an OpenFoam model from scratch by using Salome to do the CAD processing and the Meshing! • Download the CAD here: • https://www.mediafire.com/file/6kgn24... • I'll also give you some useful bits of knowledge about turbulence modeling in CFD analysis, so I hope this will be useful! • What you will learn in this video: • 00:00:00 Introduction • 00:03:08 Preparation of the Geometry in Salome • 00:13:30 Meshing of the inner Volume in Salome Smesh • 00:19:35 Preparing the OpenFoam Case Study • 00:20:56 Choosing the OpenFoam Solver • 00:23:26 Choosing the turbulence Model • 00:29:23 Converting the Mesh to OpenFoam • 00:34:40 Setting up all the OpenFoam Boundary Conditions and settings • 00:50:44 Setting up the residuals monitoring • 00:57:51 Solving the case • 00:59:40 Checking the convergence of the residuals • 01:00:50 Post-processing of the results with ParaFoam (Paraview) • If this video was helpful, please leave a like and subscribe to my channel, thank you!! • What is Openfoam? • Openfoam is currently the leading free and open-source solver for Computational Fluid Dynamics (CFD). • It belongs to the Openfoam foundation and it is distributed under a GPL License. This GPL License gives you the freedom to redistribute the software and it garanties that the usage will remain free. • Check my blog and other Open-Source Simulation Tutorials: • http://feaforall.com/

#############################

New on site