Installation of Road Stud

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=Il3zHiqn2Fs

Installation method of road stud: • 1. Clean the installation location with a brush, and ensure the drying of installation position at the same time. • 2. Smear the road stud evenly with adequate amount of glue. • 3. Press the road stud tightly in the installation position in the right direction. If the glue is too much, it must be cleaned up. • 4. Remove the isolation facilities after solidification of road stud for 4 hours. • More details,welcome to visit our website : • http://www.roadstudlight.com

#############################

New on site