Youtor
Switches in ESPHome
>> YOUR LINK HERE: ___ http://youtube.com/watch?v=It-JWpzT9YA
#esphome #home_assistant #switch • Learn how to use pins of ESP8266 and ESP32 development boards as switches in Home Assistant. This is done with ESPHome add on. • Simple Switch: • switch: • platform: gpio • name: Switch 1 • pin: xx • Define ID: • switch: • platform: gpio • name: Switch 1 • pin: xx • id: relay • platform: gpio • name: Switch 3 • pin: 5 • restore_mode: RESTORE_default_ON • • platform: gpio • name: Switch 4 • pin: 12 • inverted: true • • platform: gpio • name: Switch 6 • pin: 14 • icon: mdi:gate • on_turn_on: • delay: 2000ms • switch.turn_off: relay • restore_mode (Optional): Control how the GPIO Switch attempts to restore state on bootup. • RESTORE_DEFAULT_OFF (Default) - Attempt to restore state and default to OFF if not possible to restore. • RESTORE_DEFAULT_ON - Attempt to restore state and default to ON. • RESTORE_INVERTED_OFF - Attempt to restore state inverted from the previous state and default to OFF. • RESTORE_INVERTED_ON - Attempt to restore state inverted from the previous state and default to ON. • ALWAYS_OFF - Always initialize the pin as OFF on bootup. • ALWAYS_ON - Always initialize the pin as ON on bootup. • Link of other tutorials: • Home Assistant integration with ESP32 flashed with ESPHome: • • Home Assistant integration with ESP32... • Setup ESPHome with Home Assistant: • • Setup ESPHome with Home Assistant • Buy Me A Coffee: • https://www.buymeacoffee.com/kian.sma... • #esp32 #esp8266 #nodemcu #development_board #esp #tasmota #wifi #tuya #inverted_switch #momentary_switch #icon #wled #automation #automations #blueprint #smart_home #home_automation #bms #iot #zwave #z_wave #zigbee #bluetooth #integration #add_on #peace #comfort #energy_saving #security #gpio #gpio_switch
#############################
