HOW TO SETUP A SKIMBOARD

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=IubM6ngJfgA

Have you ever had traction fall off of your new skimboard? Here are a few simple tips to ensure that your traction will stick to your board for as long as you ride it. • SUBSCRIBE: https://www.youtube.com/c/SkidKids?su... • CHECK OUT OUR WEBSITE! https://skidkids.tv/ • The materials you will need • 1. GooOff or acetone • 2. Cleaning rag or paper towel • 3. 50- to -80 grit sand paper (initial sanding) • 4. 120- to- 140 grit (secondary sanding) • Use the coarse sand paper (50 to 80 grit) to begin the polishing process on the areas of the board you will be applying the pads. Use the finer sanding paper (120-to 140 grit) to smooth out the surface that you will be applying the pads to even further. Make sure to clean the sanded areas as best as you can by scrubbing with GooOff or acetone. Boom! Slap that traction on your board and you are good to go! • FOLLOW US ON INSTAGRAM! • @skidkids_tv / skidkids_tv • BLAIR: @blairconklin / blairconklin • VIDEO: @dadeshields / dadeshields

#############################

New on site