Youtor
>> YOUR LINK HERE: ___ http://youtube.com/watch?v=J6MCt_147hc
To change the oil in the DGS7 DQ200 robotic gearbox, you will need the following tool: • End heads for 10, 13, 16 • Hex H10, H5 • Torx T30 • A tube with a diameter of 7-8mm, a syringe • Torque wrench • ========================= • Spare Parts: • VAG G004000M2 - 1 piece - hydraulic liquid in Mechatronics • VAG G055512A2 - 2pcs - transmission oil • VAG N10037105 - 1pc - pallet stopper • VAG N90414203 - 2pcs - Mechatronics plugs • It is recommended to change the oil every 40000-60000 km. • ========================= • The DGS7 DQ200 gearbox was installed on a large VAG line: Audi A1 / A3 / Q3, Skoda Ovtavia / Superb / Yeti / Fabia, Volkswagen Golf / Polo / Passat, etc. • ========================= • To change the oil, you need to remove the air filter housing, battery, battery pad, starter. • Tightening torques of plugs: • Large plug N10037105 in the mechanical part - 30Nm • Two small plugs in mechatronics N90414203 - 5Nm + 90 degree rotation. • ========================= • Timecodes: • 0:00 Spare Parts • 0:59 Removing the air filter housing • 2:56 Removing the battery and pad • 5:30 Removing the starter • 9:22 Old butter drain • 13:15 Pour new oil into the mechanical part • 15:12 Pour new oil into the mechatronic • ========================= • My blog on DRIVE2 https://www.drive2.com/users/mark47/
#############################
