How To Replace Rear Upper Control Arm 20062012 Ford Fusion

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=JIyrRKaX4vo

Buy Now! • New Control Arm Set from 1AAuto.com https://trq.video/ia-1ASFK00975 • New Control Arm from 1AAuto.com https://trq.video/ia-1ASRU00058 • Control arms are a crucial part of the suspension system of your vehicle. They not only carry the load of the vehicle to the wheel, but they typically also maintain its alignment. Control arms are typically large and strong, so you may be surprised it needs replacing. They contain rubber bushings for smoother rides at the cost of eventual wear. When those bushings run out, that can have a negative impact on the ride and safety of your vehicle. This video shows you how to install new control arms in your 2006-2012 Ford Fusion. • • Check here for more videos on the 2006-2012 Ford Fusion: • Ford Fusion 2006-2012 1st Generation • This repair was done on a 2011 Ford Fusion SEL 3.0L Sedan 4-Door AWD and the process should be similar on the following vehicles: • 2006 Ford Fusion • 2007 Ford Fusion • 2008 Ford Fusion • 2009 Ford Fusion • 2010 Ford Fusion • 2011 Ford Fusion • 2012 Ford Fusion • Tools you will need: • • Pry Bar https://trq.video/opW-1AXAA00020 • • 3/8 Inch Impact Gun • • Ratchet https://trq.video/o7o-1AXAA00016 • • Socket Driver • • Swivel • • Torque Wrench https://trq.video/oGe-1AXAA00044 • • Liquid Thread Locker • • Center Punch https://trq.video/odZ-1AXAA00055 • • Floor Jack https://trq.video/osm-1AXAA00068 • • Hammer • • Jack Stands https://trq.video/oqI-1AXAA00065 • • Wheel Chocks • Subscribe: / @trq • Check out our playlist: • Ford Fusion 2006-2012 1st Generation: • Ford Fusion 2006-2012 1st Generation • ⚠ DISCLAIMER: • While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

#############################

New on site