burhan çaçan gele gide wearbryn

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=JLf64dsxsYs

Here is a tutorial on how to setup your VFD and OpenBuilds BlackBox to accept control from the OpenBuilds Control Software. Follow the wiring in the video above. • ****DISCLAIMER***** • These settings work and have only been confirmed to work with the 1.5Kw, 110v, 24,000RPM Spindle and HY01D511B VFD Controller! I have not tested these on any other VFD or with any other Spindles! Please take caution if using these settings with any other VFD/Spindle Combination. I take no responsibility if you fry your stuff!!! • ****END DISCLAIMER**** • Here are the VFD Settings. Do set these in this order: • PD013 = 8 • PD001 = 1 • PD002 = 1 • PD005 = 400 • PD004 = 400 • PD008 = 110 (This is for 110V systems. If you are using 220V set this to 220) • PD024 = 1 • PD070 = 0 • PD072 = 400 • PD144 = 3000 • Set GRBL settings in OpenBuilds Control software to the following: • $30 = 24,000 (or whatever your maximum RPM setting is of your spindle) • $31 = 0 • Link to my Spindle and VFD: • https://www.amazon.com/gp/product/B07... • Link to AirPump: • https://www.amazon.com/gp/product/B07... • Links to other info I used to help figure this out: • https://openbuilds.com/threads/please... • https://docs.openbuilds.com/blackbox/... • • Here are links to download the different GRBL Post Processors that include the 8 second pause: • Fusion360: / 770491973473924 • SoldworksCAM (File 1 of 2): / 770499930139795 • SolidworksCAM (File 2 of 2): / 770500186806436 • VCarve Pro: / 770500830139705 • • Let me know if you have any questions in the comments below!

#############################

New on site