Youtor
2 WAY ALARM system Installation in Honda RS125 fi Tutorial
>> YOUR LINK HERE: ___ http://youtube.com/watch?v=Ji0baYco8gQ
Step by step tutorial on how to install the TWO WAY ALARM system with 12v relay in Honda RS125fi. • 1.First yellow wire of alarm harness tap to the orange wire (signal light left) • 2. Second yellow wire of alarm harness tap to the light blue wire(signal light right) • 3. Black wire of alarm harness tap to the negative wire(green for honda rs125 fi) • 4. Orange wire of alarm harness tap to the accessory wire (black for honda rs 125fi) then jumper to black with blue stripe wire (ECU accessory wire of honda rs 125fi) • Note: there are two same color of wire(black with blue stripe ) one is for 2nd gear and 2nd is for ECU.. select the one for ECU. • • 5. Red wire of alarm harness tap to the positive wire from battery (red with black stripe for honda rs 125 fi) • 6. Gray wire of alarm harness tap to the pulser ( blue with yellow stripe for honda rs 125 fi) • 7. Blue wire of alarm harness tap to the positive of 12 v relay and common of relay. • 8. Normally open contact of the 12v relay tap to push start wire positive trigger (yellow with red stripe for honda rs 125 fi) • 9. Negative of 12v relay tap to the neutral switch (bluegreen with red stripe for honda rs125fi) • Thats all..Thanks..please like and subscribe...Ingat po sa pag wiring...GODBLESS.. • #Twowayalarmsystem #Antitheft #Iwasnakaw #Twowayalarmwithrelay #Immobilizer #Keylessstart #Paanomagkabitngtwowayalarm • #RS125fi #Honda
#############################
