How to use MTN PRO AntiCorrosive Enamel Paint

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=JlgcmtTZUmE

2 in 1: Anti-Rust Primer and Finish in One Product. • The MTN PRO Anticorrosive Enamel Paint is a high gloss enamel paint that can be applied directly to rust, avoiding the need to sand and remove the rust. • It is fast-drying and excellent color retention even outdoors, offering a perfect finish. • Thanks to the characteristics of the product, it is perfect for touch-ups and painting all kinds of ferrous materials. • 0:09 -Wear gloves and a mask • 0:13 -Degrease and clean the surface with MTN PRO Solvent before painting • 0:21 -3 colors available: White, Green and Black. • 0:24 -Shake well for one minute by inverting the can • 0:31 -Try out the distance and flow of the paint on a test surface • 0:37 -Paint holding the can as vertically as possible, making sure to cover the entire surface • 0:54 -Paints directly on rust • 1:05 -Can be recoated with the same product after two hours • Touch dry after 25 minutes, totally dry after 24 hours. • 1:11 -When finished, clean the nozzle by holding the can upside down and press down until only gas comes out. If the nozzle is clogged, simply replace it with a new one. • Any questions? • [email protected] • http://www.montanacolors.com • Recycle – Repair – Repaint – Reuse!

#############################

New on site