Youtor
How To Fit A MASTHEAD AMPLIFIER amp Power Supply Unit
>> YOUR LINK HERE: ___ http://youtube.com/watch?v=KBxiE7REJKQ
This video shows you how to install a TV aerial masthead amplifier and power supply unit. With this type of amplifier the power supplied via the coaxial cable itself which usually plugs in by a TV. This makes it perfect for installing amplifiers in positions where there is otherwise no electrical power point to plug a traditional aerial amplifier in, like in lofts, outside or on the aerial mast itself. • In the video demonstration, A wolsey 4 way 0-10dB masthead amplifier and Wolsey 12V power supply unit have been installed onto a Optima log periodic wideband aerial. • Tools you will need: • 1x Stanley Blade or Utility Knife • 1x Side cutters • Parts you will need: • 1x Masthead amplifier • 1x 12V Power supply unit • F connectors • Insulating tape for securing cable to mast • Step by step guide: • Masthead amplifier • 1) Cut the existing aerial cable where you intend to install the masthead amplifier. • 2) Install F connectors on both ends of the cable. • 3) Install a third F connector (If you're using a multiple output masthead amplifier) onto a new coaxial cable which will be fed into a new room, repeat this process for as many extra cables you will be installing. • 4) Insert the aerial input cable into the input of the masthead amplifier. • 5) Install all the remaining output cables and screw into position. • 6) Tighten all F connectors with a 11mm spanner or pliers to maintain the integrity of the cable screen and to minimize RF leakage. • 7) Secure the amplifier in position. • Power Supply Unit • 8) Cut the aerial cable where you intend to install the power supply unit. • 9) Install F connectors on both ends of the cable. • 10) Screw the aerial side cable into the input of the power supply unit, often marked aerial or 12V. • 11) Screw the TV side cable into the output of the power supply unit, often marked TV or output. • 12) Plug power supply unit into mains point. • For more information on how to install a F connector please watch this video. • • How To Fit An F Connector Onto A Coax... • If you need to install a separate splitter for extra TV point, please watch this video. • • How To Fit A TV Aerial Splitter For E... • For more information on how to install a masthead amplifier, please read our blog. • https://www.smartaerials.co.uk/blog/h...
#############################
