TRX450 Carb Cleanout

>> YOUR LINK HERE: ___ http://youtube.com/watch?v=KPm4w59HUJ8

How To: Clean, Rebuild, and Adjust a Carburetor. • Here are the steps: • 1. Disassemble the carburetor, remove all jets, screws, gaskets, seals etc. • 2. Dip the carb body and bowl in the parts cleaner for an hour. • 3. Remove carburetor and scrub with brass brush. • 4. Put carb back in dip overnight. • 5. Remove carburetor in the morning and look at that shine! • 6. Spray carb cleaner through all jets, passageways and orfices. • 7. Spray compressed air through all jets, passageways and orfices. • 8. Assemble Carburetor, replace seals, gaskets, needle valve, seat and jets with new ones. • 9. Repeat steps 6 and 7. • 10. Adjust air screw and float height according to your service manual. • Congratulations, you now have a perfectly cleaned and rebuilt carburetor that you hopefully won't have to clean ever again! (As long as you use a fuel filter and new air filter) • Please consider supporting my channel to help keep the videos coming! • Patreon: / goldguy • Paypal: https://www.paypal.me/masonmcalister • Hit that subscribe button to come along for the ride! / goldguyrides • Follow me on instagram @goldguy_official • and tiktok: / goldguyofficial • Check out my parts store on eBay (and merch): • https://www.ebay.com/usr/mcalistermoto • Thanks for Watching! • #diy #motorcycle #restoration

#############################

New on site