Youtor
Homemade brake bleeder apparatus part 1
>> YOUR LINK HERE: ___ http://youtube.com/watch?v=KXHlVNHfC3Y
Introduction of my homemade brake bleeding tool using a 1 gallon pump sprayer. I realize I'm not the first person to build one of these out of a pump sprayer. Just my personal spin. • I later discovered the reason my cap leaked a bit was the threads on the master cylinder reservoir were stripped and the cap would not screw on tight. The new reservoir cap I purchased would not tighten down as well either. • Part 2: • Homemade brake bleeder apparatus (part2) • Or you can buy one already made from Summit Racing: • https://www.summitracing.com/parts/mv... • Parts required: • Pump sprayer (1 gallon of less) • Roll of 1/4 ID Poly tubing • Spare brake fluid reservoir cap • 1/4 NPT X 1/4 male pipe fitting • 1/4 NPT (female) to 3/8 (male) adapter • Fuel shutoff valve or 1/4 valve • 1/2 Copper washer, thread locker, O-ring
#############################
